New 24W constant-current LED driver adapter from Phihong

Phihong USA has introduced a new 24W LED driver adapter for residential lighting applications, including under-counter lighting and high-brightness floor and table lamps. Designated the PDA024A-S, the Class 2 adapter is available in 700, 1000 and 1500mA outputs at the North American nominal input voltage range 110-120VAC.

“External LED driver adapters significantly reduce the amount of heat produced in an enclosure by completely eliminating the driver circuitry from lighting fixtures, which also allows OEMs to use brighter and higher power LEDs at greater efficiencies,” said Keith Hopwood, vice president of marketing for Phihong USA.

The PDA024A-S LED driver adapters are designated as Class 2 outputs per UL1310 and UL8750, have a no load power draw of 0.15W and meet the requirements for Level V efficiency marking. In addition to power factor correction of 0.9, standard features include input over-current, output over-voltage, short-circuit and open-circuit protection.

Rated IP20 for dry indoor environments, the PDA024A-S LED driver adapters measure 90.5mm x 55.5mm x 38mm and weigh 125g. The adapters also feature a 1.5-meter DC cord terminated with a 2.1mm x 5.5mm center positive barrel connector. Additional options for DC tips are available through Phihong’s in-house design service, and no minimum order quantities apply.


Check Also

Toshiba launches first 30V N-channel common-drain MOSFET

Toshiba Electronics Europe has launched their first 30V N-channel common-drain MOSFET. The new SSM10N961L device …